1 minute reading time
(128 words)
How to set CRPM in Case IH Puma tractors
Here is another video in my "How To" series explaining how to set the CRPM (Constant Revs Per Minute) in the Puma tractor. This allows you to automate your rev settings for different situations eg. in the field for one and then say when doing a turn on the head lands for the other setting. I also explain how the CRPM can be set on the Pro 700 monitor if your tractor is fitted with one of these as well. Keep an eye out for more how to videos. Browny
Setting the CRPM in Puma tractors
Video shows how to do it on the control panel as well as on the Pro 700 monitor
About the author
Related Posts
Our Latest Blogs
30 August 2017
Ever wondered exactly what the difference is between the Case IH Puma and the Puma Sugar Special which you may have seen advertised?Well, if you are looking at a CVT (Continuously Variable Transmission) Puma, then the only real difference is that the...
22 August 2017
Another short video - this time on how to adjust the hydraulic flow for electronic rear remotes in Case IH Puma CVT or Ultimate Series tractors, especially if you do not have a pro 700 monitor. This enables you t...
16 August 2017
This is a handy feature of the Case IH Maxxum series of tractors. It enables you to program transmission gear selection to suit the application at hand. If you haven't already tried using this feature, you should give it a go. Easy to do....
16 August 2017
Ever wondered how easy it is to access the battery on Case IH Puma tractors?? Well, it is as simple as undoing the two screws above the steps and allowing the cover to pivot back on the hinge below. In the photo above of the Puma 165...
15 August 2017
A couple of "How To" videos on how to use the Headland Management System on the Case IH Puma, Magnum and Steiger tractors. This function enables you to record a sequence for when you wish to turn into a field and for when you leave the fi...
Contact Us